The Hot Saw is placed before the cooling bed to cut the rolled sections to the required lengths. One no
Fixed Hot saw is placed before the cooling bed to cut the front end of the sections Traveling Hot saw is
placed at a distance from the Fixed Saw. The distance can be adjusted equal to the travel of the Hot saw
along the axis of rolling. Number of traveling Hot saw required depends on the length of the rolled
section & the number of cuts required along the length of the section.
The rolled section is gripped on the run out roller table.
The Hot saw Blade of the Fixed & traveling Saw, plunges at right angle to the rolling axis cutting the section at the front end as well as at the required lengths by Traveling hot saw After cutting the grip is released and the cut section is delivered on the cooling bed. Advantage : Because of the sliding type saw, heavier sections can be cut with better straightness compared to pendulum type saw.
We offer Traveling Type Hot Saw, which is chiefly required in steel & metal industry and construction industry. In this, the hot saw is positioned before the cooling bed, where the rolled section is cut to the given lengths. The traveling hot saw is placed at a good distance from the fixed saw. Further, this distance can be altered equal to the travel of the hot saw along axis of rolling. Traveling hot saw after cutting the grip releases and the cut section is delivered on the cooling bed. The length of the rolled section and the number of cuts required along the length of the section determines the number of traveling hot saw required in a given situation.
We offer Fixed Type Hot Saw, which is extensively installed in various steel & metal industries. These are placed before the cool bed where it cuts the front end of the sections. Here, the rolled section is gripped on the run out roller table and fixed saw plunges at the required angle to the rolling axis. It cuts the section at the front end as well as at the required lengths.